ARB USA Brand
Awning Bracket 813401
MSRP
![[no star]](/img/icon-empty-star.png){kind=icon}
Product Information
The OS850 awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the OS850 awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar and Rhino Heavy Duty in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar and AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The 813402 awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. Units are now in stock with additional shipments due mid June. The current awning bracket P/No OS3071 has recently been upgraded from 3mm to 4mm construction however it is considered lighter duty and designated for highway use. ; | ARB Awning Bracket 813401
Other ARB USA Brand Available
Rack Attack DC
![[full star]](/img/icon-full-star.png){kind=icon}
(2)
3501 Carlin Springs Rd
Bailey's Crossroads, VA 22041
Pickup Available Now
Authorized ARB USA Brand Dealer
Three Pedals, LLC
23585 Overland Dr #124
Sterling, VA 20166
Authorized ARB USA Brand Dealer
Backwoods Overland
5407 Buffalo Rd
Mt Airy, MD 21771
Authorized ARB USA Brand Dealer
Bull Run Overland
6008 Wheeler Lane
Broad Run, VA 20137
Authorized ARB USA Brand Dealer
Adrenaline Off Road LLC
15201 Birmingham Dr
Burtonsville, MD 20866
Authorized ARB USA Brand Dealer
Land Cruiser Heaven
219 Frederick St
Hagerstown, MD 21740
Authorized ARB USA Brand Dealer
Off Road Innovations
156 Cole Ln
Winchester, VA 22602
Authorized ARB USA Brand Dealer
Chaos Fab Shop
344 Victory Rd
Winchester, VA 22602
Authorized ARB USA Brand Dealer
4 Wheel Parts-Off Road Truck & Jeep 4x4 Parts
6715 B RITCHIE HWY
Glen Burnie, MD 21061
Authorized ARB USA Brand Dealer
Extreme 4 Wheel Parts-Off Road Truck & Jeep 4x4 Parts
1019 York Rd
Towson, MD 21204
Authorized ARB USA Brand Dealer
Perry Hall Power Equipment Inc
9621 Pulaski Hwy
Middle River, MD 21220
Authorized ARB USA Brand Dealer
Mount Zion Offroad
4785 Carlisle Rd
Dover, PA 17315
Authorized ARB USA Brand Dealer
Hoak's Four Wheel Drive Center
815 Hellam St
Wrightsville, PA 17368
Directions
Contact
Website
Product Information
The OS850 awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the OS850 awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar and Rhino Heavy Duty in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar and AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The 813402 awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. Units are now in stock with additional shipments due mid June. The current awning bracket P/No OS3071 has recently been upgraded from 3mm to 4mm construction however it is considered lighter duty and designated for highway use. ; | ARB Awning Bracket 813401
